Transform Your Bath Space - Installation Guide For New Shower Units

Request Service

We have noticed this great article on How to Install a Shower Enclosure directly below on the web and decided it made good sense to talk about it with you on this page.

An effective shower installment calls for mindful preparation and also a great deal of job. In most cases, you will certainly require to do 3 sorts of jobs: mounting wall surfaces, mounting the plumbing, and also finishing wall surfaces.

Various Sorts Of Shower Units

Push-on Mixer: The hose and spray parts of the push-on mixer shower device can be attached to the bathroom faucet as per your need, and also the water temperature level can be changed through the taps. Push-on mixers are cheap and also exceptionally basic to set up. However, although the hose link is basic, it is quickly dislodged. Additionally, it is bothersome to change the temperature.

Bath/Shower Mixer: The hose and also spray of this kind of shower are combined with a bathroom mixer faucet, as well as the temperature can be readjusted through the bathroom taps. It is a very economical choice and no added plumbing is entailed. Nonetheless, the bath/shower mixers likewise suffer from bothersome temperature level control options.

Guidebook Mixer: The pipe and spray of a hand-operated mixer shower system are a part of the wall surface system and also the cold and hot water supplies are attached to a single shutoff The temperature and also stress of the water are controlled with either one or a variety of handles (in much more pricey showers). Although temperature control is a lot easier in hands-on mixer types, they are more costly than the previously pointed out mixers. They also need additional plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The hose as well as spray of this shower type are a part of the wall surface system and also the hot and cold water products are connected to a solitary valve right here also. It is total with an integrated stabiliser to self-adjust the water temperature as well as to prevent it from ending up being also hot. Among the biggest advantages of a thermostatic mixer shower kind includes practical temperature level control. However, it is one of the most expensive of the different mixer alternatives.

Power Shower: A power shower is a single system having a powerful electric pump that can altering both the water pressure and also temperature. This kind of shower can be fitted if there is water system from a cold water tank and a warm water cyndrical tube. A power shower makes the adjustment of both pressure as well as temperature level easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a combination central heating boiler under keys pressure.

Electric Shower: An electric shower is plumbed right into a keys cold water supply and also it heats the water electrically. It is very important to keep in mind that for this shower kind to be installed, the mains pressure requires to be at the very least 0.7 kg/sq cm (10lb/sq in). The unit enables the temperature level and also stress to be adjusted through a knob. Designs with temperature level stabilisers are much better as they remain unaffected by other taps somewhere else in operation within the house. A major drawback of electric showers is that the control knob only enables the choice of heats at much less stress, or reduced temperature levels at a greater pressure. This is problematic in the winter season when the spray is typically weak as well as the keys water is chillier. Nevertheless, this issue is taken on in some versions which are readily available with a winter/summer setup.

The Majority Of Common Mistakes

Violating or ignoring local code restrictions.

Using pipes that are too small.

Attaching copper to galvanized without making use of a brass or dielectric suitable in between both.

Not making use of tape or pipeline substance at threaded joints.

Not leveling your fixtures when installing them.

Not installing an air gap filling for components.

Reducing supply stub outs also brief to set up the shutoff valves onto after the completed wall surface remains in location.

Not correctly aligning tubing into installations or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leakage.).

When turning the water back on in your home, always run the outdoors hose pipe valve or flush your commodes to hemorrhage dust as well as air from the lines. This debris can create troubles in your sink taps and other plumbing trim.

Prep work.

First of all, you should choose the type of shower that you desire to set up. It is essential to ascertain whether the picked shower can dealing with certain systems and also can control a risk-free level of water via the boiler. Most shower systems nowadays are designed to be adaptable to various water pressures (such as saved warm water as well as chilly keys).
It is likewise important to think about the water pressure and the preparation of the piping and water drainage for the shower.

Technique.

Depending on the sort of shower you want to mount, the shower head need to either be fitted in order to prevent its contact with the water in the bath listed below or the base tray, or it should have a check shutoff.
Before beginning, it is recommended to mark the settings of the shower head and control, as well as to plan the pipe-work entailed. In addition, the drainage system to get rid of the waste water will certainly need to be intended. Both positions of the wire route and also the shower switch will certainly also require to be considered if an immediate or electrical shower system is being mounted.
Use the guideline guide supplied with the shower unit to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is very important to cut off the supply of water. In order to shield the pipelines, they ought to be offered a water resistant covering as well as likewise fitted with separating valves. The pipelines can then be buried right into the wall and also plastered over to neaten the total appearance.
Fit the base tray, shower head, and installations.
Attach the main shower control to the pipes that will certainly be providing the water (This may need a women screw string adapter).
Reconnect the supply of water as well as examination the pipes for any type of leakages, as some might need tightening.
If you are setting up an electric shower, remember to switch off the electrical energy supply prior to making any electrical links. As soon as these links have been made (there ought to be support within the user's manual), the power supply can be switched over back on.

Adjusting Water Pressure to Fit Your Shower.

The cold water tank can be raised to a better height (in some cases as low as 150mm (6inches)) by installation a solid wood assistance beneath it - possibly composed of struts as well as blockboards. If you select this choice, the major and also circulation pipelines will also have to be raised to meet the new height of the tank.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it has to be attached right into the power supply in order to run.

Piping and also Water drainage.

It is best to make use of 15mm size supply pipelines, and also make the runs to the shower as brief as well as straight as feasible so regarding keep maximum pressure and minimise warm loss. Furthermore, by reducing using joints for pipeline edges, you can lower the resistance in the circulation of the water supply. You can achieve this by bending the pipes instead.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm certainly very fascinated with Simple ways to Install a Shower Cubicle on Your Own and I hope you enjoyed the post. Sharing is nice. You just don't know, you might be helping someone out. I enjoy reading our article about How to Install a One-Piece Shower Unit.

Get A Free Quote